How to access your PCs using DNS names with DD-WRT

2015-07-21 22:53:06 -0400 - wiseindy

Pretty sure you must’ve noticed it

Most of us must’ve faced this problem, especially in our home networks. You must’ve noticed that when you’re trying reach one machine from another using it’s IP address, it works perfectly. However when you try to reach it using its hostname/DNS name like wiseindy-pc, it is extremely unreliable and rarely works.

And if you’ve got the opportunity to work with corporate networks, you’ll notice that this is not the case there. Communicating with machines via hostnames is as reliable as communicating via their individual IP addresses in a corporate environment.

Is it because companies have “bigger” and “better” hardware? And your home router sucks? Well, not really.

So, what IS the problem?

The problem is pretty straightforward actually. The devices on your network don’t really know whom they should ask to resolve the hostname.

To translate a hostname to an IP address, the machine will need to know the “Fully Qualified Domain Name” or “FQDN” in short.

FQDN for a particular machine looks something like this: / / hostname.domain.whatever. A home environment (in almost all cases) is not a domain environment, i.e., the computers are not connected to a central domain unlike most companies. This part in the FQDN called the “DNS Zone”.

Let us assume that machine we are trying to connect is called wiseindy-pc and its IP address is

So on your home network, you have the hostname part, e.g. wiseindy-pc. But the machine has no idea about the part (since there IS no domain). Hence it has no way to convert wiseindy-pc to

Ok, so that explains why it doesn’t work. But, in some rare cases (probably when the planets align) it actually does work, even on a network without a DNS zone. How is that possible?

Well, as it turns out, if a DNS zone is not defined for the network, your device tries ANOTHER way to figure out the IP address before abandoning the resolving process altogether. It tries to find out the hostname -> IP address mapping on its own using a technique called “DNS broadcast”. The problem with this is that not all machines/devices are configured to answer to this DNS broadcasr, or are actually configured to deliberately not answer such a request.

To fix this you need to configure a “DNS Suffix” for your network.

So how do I get this "DNS Suffix" thing?

If you open up command prompt and type ipconfig, you’ll notice that the Connection-specific DNS Suffix is blank.

It’s extremely simple to do this on a router which has the DD-WRT firmware installed. In case you don’t have a router with DD-WRT, here’s my guide to install DD-WRT on one.

Open up a browser and navigate to your router homepage. After logging in, click on the Services tab.

Scroll down, click Save. Then hit Apply.

To get the new settings on your PC, you’ll need to refresh the IP configuration. Open up a Command Prompt window and type the following commands one after the other:

ipconfig /release ipconfig /renew

Type ipconfig. You should see that a DNS suffix is now defined.

Now, since you have a DNS suffix, the resulting FQDN for this machine will be wiseindy-pc.wise.lan. The hostname can now be resolved to its IP address easily.

Repeat this ipconfig /release and ipconfig /renew on at least one more machine and try pinging wiseindy-pc using only the hostname. You should see that the client has automatically understood that the full name of the device you’re pinging is wiseindy-pc.wise.lan (, and was able to translate (resolve) the FQDN to an IP.

(header image source: